Alpha ESS SMILE5 AU Installation, Operation & Maintenance Manual page 23

EMS INTRODUCTION AND SET UP
4.2.2 Status
Status menu contains five sub-menus: Solar,
Battery, Grid, UPS and Comm .These display
the relevant information about the current
physical or communication interface
respectively.
Grid interface displays the real-time information
on the ultility grid side:
voltage U, current I, frequency F, P
P
MeterDC
Solar interface displays the real-time information
of PV side: voltage U1, current I1, power P1,
voltage U2, current I2 and power P2.
Battery interface displays the real-time
information of battery side: voltage U, current I,
power P, residual capacity of Battery (SOC), the
internal environmental temperature Temp
UPS interface displays the real-time information
in this mode: voltage U, current I, power P,
frequency F
Communication interface displays the real-time
communication situation of BMS, Net, MeterGrid
and MeterDC.
, P ,
Inv MeterAC
.
41 42
4.2.3 History
EMS INTRODUCTION AND SET UP
History menu contains seven sub-menus: Grid
Consumption, INV Gen., BAT Gen., PV Gen.,
Grid Charge, PV Charge, Error Logs
Grid Consumption interface displays today's or
total load consumption from grid
INV Gen. interface displays today's or total
electricity quantity generated from SMILE5-INV.
Bat Gen. interface displays today's or total
electricity quantity discharged from the
battery.
PV Gen. interface displays today's or total
electricity quantity generated from the
PV-panels.
Grid Charge interface displays today's or total
electricity quantity battery charged from the
grid.