Online Monitoring; System Setup In Monitoring - Alpha ESS SMILE5 AU Installation, Operation & Maintenance Manual

ONLINE MONITORING

Connect to
Connect to Router System
the hotspot
the hotspot Configuration Configuration
Runnig information
Running information
On Grid PV Capacity (kW) (kW)
S/N:AL2002220050002
Working Status: UPS
Grid Meter CT Meter
System Time:2020/05/29 16:54:46
PV Inverter Power(W): 0
PV Meter CT Meter
Inverter Power(W): 47
Battery Power(W): 57.9
Safety Regulations
Grid Power(W): 0
Submit
Step 5: Set the basic parameters, and you can see the device details , click "Submit" button.
Safety Regulation Setting: AS4777.2 for Australia,
please find in Section 9.2
Connect to Router System
the hotspot Configuration Configuration
On Grid PV Capacity (kW) (kW)
Grid Meter CT Meter
PV Meter CT Meter
Safety Regulations
AS4777-SA
Submit
PS: Volt-Var/Watt setting can be enabled once the AS4777.2 -SA been selected. Disable this setting
can be achieve by change AS4777.2 -SA back to AS4777.
NOTE: If not registered, please register account according to the hint after
downloading and installing App.
06 ONLINE MONITORING
Installers who haven't registered yet need to click "Register" to visit the registration
page. Please refer to "AlphaCloud Online Monitoring Webserver Installers User
Manual" , which you can get from AlphaESS sales and get your personal license number
from relevant AlphaESS sales.
Router System Connect to Router System
Configuration Configuration
the hotspot Configuration Configuration
System information
Runnig information System information
System information
S/N:AL4001019000000
Model: Storion-Senergy
Safety Regulations: AS4777
Battery Installed Capacity(kWh): 0.0
On Grid PV Capacity(kW): 5.8
Meter: 0
Inverter Version: V00.00
EMS Version: V1.03.25
BMS Version: V0.00
OK OK
AS4777.2 -SA for SA region
Log in to your installer account and choose
Storage System Maintenance> "Install new
system" to register a new system at AlphaESS.
49 50
Enter the system S/N, check code, license, installation date, client name, contact number,
contact address, and click the save button. The red * marks required information for this
. For other details
process. Click the Browse button to select an attachment you want to add.

6.1 System Setup in Monitoring

Some of the system settings must be carried in the installer monitoring. To do this,
follow the steps below:
Step 1: Please login in the installer account, click the list of storage systems and enter the
SN.
6.1.1 Basic Information
Step 2: After selecting the correct system, enter System Setup interface. Enter in the
"Basic Information" and input below information:
- Address,
- Zip code,
- Contact name,
- E-Mail address,
- Currencies and
- Telephone number.
NOTE: Do not forget to click "Save" button!
6.1.2 Other Information
Step 3: select the "Other Information" submenu and set the following parameter:
- Time zone
- Data upload frequency: SMILE5 has second level data, you can choose it as 10s data if
you wish.
Finish Installation
6.1.3
Please referring to "Smile 5 Commission Check list" to cross check the system status and
complete the installation.
ONLINE MONITORING