Configuration
Ventilation Defaults
Apnoea ventilation on/off
To determine whether apnoea ventilation is automatically ready
for use when starting.
●
Press menu button »Calib./Config.«.
●
Press menu button »Ventilation
●
Enter code number »3032«.
●
Select the menu »Mode« via the menu button
jj
»Ventilation
«.
●
Select screen key »Apnoea vent.« = turn rotary knob.
●
Switch on apnoea ventilation = press rotary knob,
the "LED" in the screen key »Apnoea vent.« lights up yellow.
●
Switch off apnoea ventilation = press rotary knob,
the "LED" in the screen key »Apnoea vent.« lights up green.
Leakage compensation* on/off
Automatic leakage compensation allows the unit to
compensate leakages up to 100 % of the set tidal volume in all
volume-controlled ventilation modes.
The setting for »Leakage compensation on/off« is saved and
remains effective when the unit is restarted.
●
Press menu button »Calib./Config.«,
●
Press menu button »Ventilation
●
Enter the numerical code »3032«.
●
Select the menu »Parameter« via the menu button
jj
»Ventilation
«.
Display:
●
Select screen key »Leakage comp.«,
●
Switch on »Leakage comp.« = press rotary knob,
the "LED" in the screen key »Leakage comp.« lights up
yellow.
●
Switch off »Leakage comp.« = press rotary knob,
the "LED" in the screen key »Leakage comp.« lights up
green.
*
For a detailed description of leakage compensation, refer to
page 124 in the Annex.
80
jj
«.
jj
«.