Dräger Evita 2 dura Instructions For Use Manual page 35

For immediate operation (e.g. in an emergency) the device
check can be interrupted:
O
●
Press the » « key. The device immediately starts
ventilation.
Evita 2 dura is ready for use when the device check and
leak test have been successfully completed.
Either:
●
Leave Evita in Standby mode and if necessary preselect the
ventilation mode and ventilation parameters,
or:
1 Immediately start up Evita 2 dura, press »
or:
2 Switch off Evita 2 dura for later use. Switch on back
panel = pivot the cover-flap to the side, press button in
as far as it will go and release.
O
«,
D
2
Preparing for use
Device Check
Evita 2 dura
1
35