Patient Mode; Selecting The Patient Mode - Dräger Evita 2 dura Instructions For Use Manual

Patient mode

The patient mode can be selected after switching on
Evita 2 dura:
— »Adults« = adult patients
— »Paed.« = children
— »Neo.« = neonates (when using the "NeoFlow" option)
— »prev. patient« = previous patient
Example:
Adult ventilation
With this information, Evita 2 dura defines the adjustment
ranges and the start-up values of the ventilation parameters.
The screen key »prev. patient« can be used to restore the
specific patient settings, including alarm limits and monitoring
status, effective before switching off the device.
The previous modes are displayed in the status line:
— Previous ventilation mode (example: IPPV)
— Previous patient mode (A = Adult)
— Previous application mode – tube or mask for optional NIV
(example: NIV)
The key »prev. patient« is not displayed by Evita 2 dura
following a loss of data or removal of a previously used option
(e.g. NeoFlow), thus preventing restoration of the previous
setting.

Selecting the patient mode

Either:
●
Select the »Adults« key or
the »Paed.« key or
the »Neo.« key (NeoFlow option) = turn rotary knob.
●
Confirm = press rotary knob.
or:
●
Select the key »prev. patient« = turn rotary knob.
●
Confirm = press rotary knob.
Operation
Starting up
39