B.6 Diagnostics Error Messages
If errors are detected, make sure that:
•
The cabling matches the current test mode
•
The cabling is properly connected
•
The connectors are free of physical damage
•
The adapter speed matches the network speed
•
No resource conflicts present (I/O address range, interrupt level, etc.)
Note: Running the test on a heavily-loaded network may cause the Transmit/
Receive test to report errors.
Whenever an error is detected by the diagnostics program, an error message is
displayed on the screen. These messages are self-explanatory, meaning that next to
the error message you will find a more detailed description and suggestions to
solving the error condition. For this reason you will not find diagnostics error
messages and suggested actions in this publication.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
73
Driver Messages