The Setup Program; Running The Setup Program; Figure 5. Setup Start Screen - Windows 95 And Windows Nt - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

6. The Setup Program

The Setup program on the Olicom Setup Disk can be used to install the utilities
that come with the adapter. The Setup program also gives access to Olicom's
extensive on-line documentation containing detailed information on how to install
the software drivers required in various operating environments. The Setup
program can be run both under DOS and under Windows.

Running the Setup Program

Windows 95 and Windows NT
1. Insert the Olicom Setup Disk and run
A:\SETUP

Figure 5. Setup Start Screen - Windows 95 and Windows NT

2. Select "Windows 95 driver upgrade" if you want to update the network driver
used in Windows 95, see also Microsoft Windows 95 on page 18.
Note: This button is not available if run under Windows NT.
3. Select "Help" or "Installation Overview" to access the on-line documentation,
select "Utility Installation" to install the utilities that come with the Ethernet
MCA 10/100 Adapter.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
15
The Setup Program