Netware Client Express Installation For Dos And Windows 3.1X; Figure 4. Opening Screen - Netware Client Express Install - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

5. NetWare Client Express Installation
for DOS and Windows 3.1x
NetWare Client Express Install is for DOS and Windows 3.x users who want to
configure their computer as a Novell NetWare Client (DOS ODI workstation)
using Novell's Virtual Loadable Module.
Express Install installs the necessary drivers and programs to attach your PC to a
Novell NetWare network and also lets you install the utilities provided with the
Ethernet MCA 10/100 Adapter.
The following disks are required:
•
The Olicom Setup Disk
•
The Olicom NetWare Client Disk
1. Make sure the adapter is inserted and connected as described in chapter 3.
2. Insert the Olicom Setup Disk, select "Run..." and enter:
A:\SETUP
and press Enter (or click on "OK").
Alternatively, enter "A:\INSTALL" from the DOS prompt.

Figure 4. Opening Screen - NetWare Client Express Install

3. Select the "Yes" button in the "Welcome to Olicom Setup" to run the Express
Installation (use the mouse or press Enter ).
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414

NetWare Client Express Installation for DOS and Windows 3.1x

13