Netware Client 32 For Windows 95 - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

32
If the parameter is omitted, the driver selects Ethernet_802.2, which is the
current default frame type for ODI drivers. Existing LANs may be using
Ethernet_802.3.
More than one frame type may be enabled by repeating the parameter on
separate lines.

NetWare Client 32 for Windows 95

This installation requires:
•
Novell NetWare Client 32 for Windows 95 installation disks or CD-ROM
•
Microsoft Windows 95 CD-ROM (or disks)
•
Olicom Driver Disk
The installation consists of three steps:
1. Installing the NDIS 3.0 Miniport driver
2. Installing the NetWare Client 32 software
3. Converting the NDIS 3.0 Miniport driver to a Novell ODI LAN driver (if
desired)
Installing the NDIS 3.0 Miniport Driver
If your NDIS 3.0 Miniport is already installed and running, proceed to Installing
the NetWare Client 32 Software. Otherwise install the NDIS 3.0 Miniport driver as
described under " Microsoft Windows 95" on page 18.
Installing the NetWare Client 32 Software
1. Run the setup program on the NetWare Client 32 installation disks to install the
Novell NetWare Client 32 for Windows 95. See the Novell NetWare
installation guide for details.
2. When you have installed Novell NetWare Client 32, choose "Reboot" to restart
the system.
3. The installation is now completed.
If you want to use the Novell ODI LAN driver rather than the NDIS 3.0
Miniport driver, proceed to " Converting the NDIS 3.0 Miniport Driver to a
Novell ODI LAN Driver ".
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Software Installation