Windows 95 Express Installation - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

4. Windows 95 Express Installation

Windows 95 will normally install new devices with little or no user intervention.
This is however not the case for MCA adapters, as Windows 95 cannot autodetect
these adapters. Follow the steps below to install the Ethernet MCA 10/100
Adapter.
1. Install the Ethernet MCA 10/100 Adapter in a free expansion slot and connect
the cable between the adapter and the network as described in chapter 3.
2. Start Windows 95.
3. Select "Settings" and "Control Panel" from the Windows 95 "Start Menu".
4. From the "Control Panel", select "Network".
5. Press "Add" and select "Add Adapter".
6. From the Select Network Adapters window, press "Have Disk", insert the
Olicom Driver disk, and select "Olicom Ethernet MCA 10/100 Adapter (OC-
2335)".
7. Press "OK" to complete the installation.
8. Restart Windows 95 for the changes to take effect.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
11
Windows 95 Express Installation