Installation Overview - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

2. Installation Overview

1. Install the adapter in the computer. Chapter 3, Hardware Installation , explains
this in detail.
2. The system automatically assigns configuration parameters. The MCA
parameters are determined by the machine-dependent setup program.
3. Install the adapter driver(s).
If you are using Windows 95, see Windows 95 Express Installation on page 11.
If you are using Novell NetWare, see the NetWare Client Express Installation
for DOS and Windows 3.1x on page 13.
Most major network operating systems (NOSs) or operating systems (OSs)
provide installation support for Olicom cards. However, if no procedures are
available - or manual driver installation is required - use chapter 7, Software
Installation and/or the Olicom online documentation as a guideline.
Installation of the Olicom Ethernet MCA 10/100 Adapter is now completed.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
5
Installation Overview