Netware Client 32 For Dos; Netware Os/2 Requester - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

NetWare Client 32 for DOS

This installation requires:
•
Novell NetWare Client 32 for DOS/Windows 3.1x installation disks
•
Olicom Driver Disk
1. Run the install program on the NetWare Client 32 for DOS/Windows 3.1x
installation disks and follow the installation guidelines given by Novell.
See the Novell installation guide for details.
2. When prompted for Network Board drivers, select "USER SPECIFIED 32 BIT
DRIVER" or "OTHER DRIVERS".
3. Insert the Olicom Driver Disk and specify the path to the Olicom NetWare
Client 32 drivers:
A:\NETWARE\NW4X
Select "Olicom Ethernet MCA 10/100 Adapter (OC-2335)" and follow the
instructions to complete the installation.

NetWare OS/2 Requester

This installation procedure requires the following software and related
documentation:
•
Novell NetWare Requester for OS/2 v. 2.0 or higher
•
Olicom Driver Disk
•
OS/2 v. 1.1 or higher
1. Install the NetWare Requester for OS/2 on the OS/2 workstation. See the
"NOVELL NetWare Requester for OS/2 Supplement" manual. Some versions
of the OS/2 Requester Installation Program require that one of the Novell
supplied drivers is loaded. If so, simply choose one at random, and then replace
it with the Olicom driver in step 3.
2. Copy the OCE3XODI.SYS driver to the OS/2 workstation directory that
contains the NetWare device drivers:
COPY A:\OS2\OCE3XODI.SYS C:\<path>
(<path> was chosen during NetWare Requester installation)
3. Insert the following line in CONFIG.SYS to load OCE3XODI.SYS:
DEVICE=C:\<path>\OCE3XODI.SYS
The line must be inserted where the network adapter driver statements,
supplied with the OS/2 Requester, are disabled by "rems".
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
35
Software Installation