Software Installation; Why Adapter Drivers; Supported Environments And Drivers - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

7. Software Installation

Why Adapter Drivers?

The adapter driver software creates an interface between the adapter and the client
software loaded on the workstation which is required to operate in the Network
Operating System environment.
All major network operating system environments provide facilities for the
installation of adapter driver software and Olicom drivers are often pre-defined in
the relevant configuration utilities. If the facility to install Olicom drivers from the
Network Operating System is available, Olicom recommends that this approach is
taken. However, if no such procedures are available, or manual installation is
preferred, use the following sections as guidelines for the adapter driver
installation. Extensive installation procedures are available in the Olicom online
documentation on the Olicom Setup Disk.

Supported Environments and Drivers

MS Windows 95
MS Windows NT
MS Windows for Workgroups 3.11
MS Network Client 3.0
NetWare DOS ODI Workstations
NetWare Client 32 for Windows 95
NetWare Client 32 for Windows 3.1x
NetWare Client 32 for DOS
NetWare OS/2 Requester
NetWare 4.x Server
NetWare 3.12 Server
IBM LAN Support Program
IBM DOS LAN Services
IBM NTS/2 and IBM E.S.
IBM LAPS - LAN Server 3.0
IBM MPTS - LAN Server 4.0/5.0, OS/2 WARP OCE3XND2.OS2
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
Environment Driver
OCE3XM.SYS
OCE3XM.SYS
OCE3XND2.DOS
OCE3XODI.COM
OCE3XND2.DOS
OCE3XODI.COM
OCE3XODI.LAN
OCE3XODI.LAN
OCE3XODI.LAN
OCE3XODI.SYS
OCE3XODI.LAN
OCE3XODI.LAN
OCE3XND2.DOS
OCE3XND2.DOS
OCE3XND2.OS2
OCE3XND2.OS2
17
Page
18
20
25
25
28
29
32
34
35
35
37
38
40
40
43
43
44
Software Installation