Olicom Ethernet MCA 10/100 Adapter Manual To Operations page 21

14
4. Read the NetWare Client license agreement and select "Yes", if the terms are
acceptable to you. If you do not agree to license terms, you may return the
product for a full refund.
5. You are prompted for the destination directory for the Novell files. If required,
change the default directory (C:\NWCLIENT). Make sure that the Windows
directory is correctly specified.
If you do not want to install the Windows support files, click the box to remove
the check mark.
Select "OK" to continue.
6. The files are then copied from the disks to the hard disk.
Insert the appropriate disks when prompted to do so.
7. When all the files have been copied to the hard disk, changes are made to
CONFIG.SYS and AUTOEXEC.BAT (and also to the SYSTEM.INI and
WIN.INI files if you have accepted Windows support).
When asked whether or not you want to automatically login to the NetWare
server each time you re-boot the PC, respond "Yes" to add the necessary
commands to perform a login on each reboot, respond "No" to load only the
drivers required to access the NetWare server.
8. After installing the Novell files, you may install the utilities that come with the
Ethernet MCA 10/100 Adapter.
9. Re-boot the computer to complete the installation.
The Ethernet MCA 10/100 Adapter is now installed and operational.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 NetWare Client Express Installation for DOS and Windows 3.1x