Olicom Ethernet MCA 10/100 Adapter Manual To Operations page 3

ii
The Olicom clasped hands logo are trademarks of Olicom A/S.
Olicom is a registered trademark of Olicom A/S.
All other brands or product names are trademarks or registered trademarks of their respective holders.
Olicom A/S reserves the right to modify the information given in this publication without prior notice.
The warranty terms and conditions applicable for your purchase of this equipment are given at the time
of purchase. Consult your place of purchase for details.
Publication: OC-2920 v. 1.0. Part number: 710001414
© Copyright Olicom A/S, Denmark, April 1998
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written permission of the publisher.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
•
Consult the dealer or an experienced radio/television technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Modifications
If the device is changed or modified without the express approval of Olicom A/S the user may void his
or her authority to operate the equipment.
Declaration of Conformity
We Olicom A/S
Nybrovej 114
DK-2800 Lyngby
Denmark
declare under our sole responsibility that the product
Ethernet MCA 10/100 Adapter (OC-2335)
to which this declaration relates, is in conformity with the
following standards or other normative documents:
EN 50082-1
EN 55022
EN 60825-1
EN 60950
incl. amendments following the provisions of the 73/23/EEC and 89/336/EEC directives.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414