Olicom Ethernet MCA 10/100 Adapter Manual To Operations page 40

Converting the NDIS 3.0 Miniport Driver to a Novell ODI LAN Driver
1. Open the Network configuration screen (Start/Settings/Control Panel/
Network) and look for any reference to "Olicom Ethernet MCA 10/100
Adapter (OC-2335)".
Highlight all instances with the mouse and click "Remove". When all instances
of "Olicom Ethernet MCA 10/100 Adapter (OC-2335)" has disappeared, click
"OK" and restart the PC.
2. Open the Network Configuration screen (Start/Settings/Control Panel/
Network), choose Add/Adapter/Have Disk, and type:
A:\NETWARE\NW4X
Click on "Olicom Ethernet MCA 10/100 Adapter (OC-2335) 32 Bit ODI" and
press "OK".
3. When the system then prompts for the NetWare Client 32 setup disk, insert the
disk and click "OK".
If you did not install NetWare Client 32 from disk, enter the correct path to the
Client 32 files and click "OK".
4. The system may prompt for the source of the Windows 95 installation files.
If Windows 95 was installed from disk, insert the requested disk.
If Windows was installed from CD-ROM, make sure the original CD-ROM is
inserted and enter the path to the installation files.
If Windows was pre-installed on the hard disk, the path usually is
C:\WINDOWS\OPTIONS\CABS.
You may also be prompted for the location of the network driver. If so, insert
the Olicom Driver Disk, type A:\NETWARE\NW4X and click "OK".
5. If the system prompts for the remaining NetWare Client 32 disks, insert the
disks one by one and click "OK". If you did not install NetWare Client 32 from
disk, enter the correct path to the Client 32 files and click "OK".
6. When the installation is completed, press "OK" to close Network Properties
screen and "Yes" to restart the PC.
Note: If you want to re-use the NDIS 3.0 Miniport driver, remove the
OCE3XODI.INF file from the C:\WINDOWS\INF directory.
Open the Network configuration screen (Start/Settings/Control Panel/Network)
and look for any reference to "Olicom Ethernet MCA 10/100 Adapter (OC-2335)
32 Bit ODI".
Highlight all instances with the mouse and click "Remove".
When all instances of "Olicom Ethernet MCA 10/100 Adapter (OC-2335) 32 Bit
ODI" have disappeared, click "OK" to restart the PC, and install the NDIS 3.0
Miniport driver as described under " Microsoft Windows 95" on page 18.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414
33
Software Installation