Microsoft Ndis 3.0 Miniport Driver; Windows 95; Windows Nt - Olicom Ethernet MCA 10/100 Adapter Manual To Operations

66
B.2 Microsoft NDIS 3.0 Miniport Driver
The NDIS 3.0 error messages reported under Microsoft Windows 95 and
Microsoft Windows NT are identical. However, the way in which the errors are
reported to the user differs.

Windows 95

In Windows 95 error codes reported by the NDIS 3.0 Miniport driver are written to
the NDISLOG.TXT file located in your Windows directory. An example of an
error message reported by the NDIS driver could be:
Olicom Ethernet MCA 10/100 Adapter (OC-2335) (0000).
Error Code=0XC000138B, 0X00000011, 0X00000000, 0XC0FDA528, 0X00000000
The text " 0XC000138B" describes the error and refers to a specific error code,
listed below. Ignore the leading " 0XC000 (resulting in error code 138B for the
example above - Adapter not found).
If you experience any problems, you should make a backup copy of the
NDISLOG.TXT file before restarting Windows 95.

Windows NT

When running Windows NT, NDIS 3.0 errors are reported using the Event Log.
This log can be examined using the Event Viewer located in the Administrative
Tools window.
If you experience any problems with the network, check if any error messages or
warnings are posted by the driver by using the Event Viewer found in the
Administrative Tools window. All error messages and/or warnings posted by the
Olicom Miniport driver have the Source field set to OCE3XM. System error
messages, related to the Olicom driver, may occur with different source names, for
example "Service Control Manager".
The messages are listed according to Event field and are described below in Event
number order. Display the message description by highlighting the message and
press Enter .
If you experience any problems, write down the "Event ID", "Source",
"Description" and "Data" fields in the "Event Detail" window.
Ethernet MCA 10/100 Adapter v. 1.0, P/N: 710001414 Driver Messages