Table of Contents
Advertisement
Installation
6.11
Sealing strip (horizontal)
The track is fitted using the self-tapping screws pro-
vided.
1. Mark where to drill holes for the self-tapping
screws.
2. Drill holes (Ø 7.2 mm) for the screws.
3. Fit the horizontal stop strip (steel or aluminium).
4. Fit the rubber strip to the track.
6.12
Sealing strip (vertical)
1. Fit the tracks with contersunk screws, rivets or by
spot welding.
2. Fit the rubber strip to the track.
3. Secure the rubber strips by swaging the tracks
together at the bottom.
NOTE.
To fit an upper edge seal, create a 45° mitre against
the vertical strips.
www.zepro.com
Image 44. Installing a sealing strip
Z 2500-130/150
29
Hide quick links:
Advertisement
Table of Contents
