Zepro Z 2500-130 Series Installation Instructions Manual page 27

Installation
6.8.2 Statutory dimensions
Distance between the beam and the ground when
the vehicle is unloaded: Max. 550 mm. See Image
38.
Horizontal distance from the outermost part of the
platform to the underrun protection: Max. 375 mm.
See Image 38.
NOTE.
The underrun protection may be
placed further back and lower.
Horizontal distance from the outer edge of the beam to
the outside of the wheel: Max. 100 mm. See Image 39.
The lateral distance between the underrun protection
and the moving parts of the tail lift must not exceed
25 mm. See Image 40.
Each of the individual parts of the underrun
protection must have a surface area of at least 350
cm . See Image 40.
2
www.zepro.com
Image 38. Statutory dimensions
0-100 mm.
Image 39. Statutory dimensions
Max. 25 mm
Image 40. Statutory dimensions
Z 2500-130/150
Max. 375 mm.
Max. 550 mm.
Min. area: 350 cm
2
Max. 25 mm
27