Installation Of Main Fuse On Vehicles Without Connection Point - Zepro Z 2500-130 Series Installation Instructions Manual

Installation
6.6

Installation of main fuse on vehicles without connection point

On vehicles without connection point, the following fuse box with fuse, 150A (24V) or 250A (12V) must be
installed. The fuse box must be positioned well-protected as close to the battery as possible.
1. Screw the fuse box into position with the following bolts (2 x M4x25) + washers and nuts, see Image 26.
2. Connect the main power cable to the connection point and place the fuse on top, see Image 27:1 and Im-
age 27:2.
3. Connect a cable from the battery's positive terminal, see Image 27:3.
4. Screw the cable connections and fuse into place with the knob. Install the cables at 90° or 180° from each
other. Install the fuse at right angles to the cables, see Image 27.
WARNING!
The knob must lie against and centre the cable clip so that it does not come into contact with the bolt.
Incorrect installation can cause the fuse to malfunction. Risk of fire in the event of a short circuit, see Im-
age 28 and Image 29.
5. Install the fuse box cover, see Image 30.
Image 26. Screw the
fuse holder into place
Image 28. Correct installation
24
Image 29. Incorrect installation
4
3
2
1
Image 27. Place fuse
and connect wiring
Image 30. Cover fuse box
Z 2500-130/150
www.zepro.com