Disassembly
17
Disassembly
If the tail lift must be removed from the vehicle, for example to transfer it to another vehicle, for storage or for
modification please follow these instructions.
•
Support the platform with a crane or similar equipment that can safely carry the platform's weight (NB.
weight info).
•
Dismantle the tilt cylinders' upper axle from the platform and rest the cylinders on the ground.
•
Run the tilt cylinders to their minimum stroke limit to remove pressure from the circuit.
•
Dismantle the axles. Knock them out with a hammer and suitable drift.
•
Lift off the platform.
•
Raise the lift arms to their highest position.
•
Disconnect +12-24 V from the control card.
•
Disconnect all control devices from the control card.
•
Support the support frame from beneath, for example with a car jack.
•
Remove the support frame from the vehicle chassis by loosening the bolts and carefully lowering the support
frame to the ground with a car jack.
74
Z 2500-130/150
www.zepro.com