Mitsubishi Electric KD Series User Manual page 91

Appendix A: Control register list ②
Address Register name
603Ch Width_3
6044h OffsetX_1
6048h OffsetX_2
6048h OffsetX_3
6054h OutputCh_Select
6058h CLPLLLockStatus_1
605Ch CLPLLLockStatus_2
6060h CLPLLLockStatus_3
6068h CLPLLLockRst
7000h LinePeriodCounter
TM-XJ959A
R/W Parameter
Data
Setting number of output pixels of main scanning direction
R/W 0 to 16380 output from Camera Link® connector(D9〜D12)
(L6 use only）
Setting the number of offset pixels for main scanning
R/W 0 direction outputted from Camera Link® Connector
(D1〜D4). (L4/L5/L6 commonly use） Fixed to 0.
Setting the number of offset pixels for main scanning
R/W 0 direction outputted from Camera Link® Connector
(D5〜D8). (L4/L5/L6 commonly use） Fixed to 0.
Setting the number of offset pixels for main scanning
R/W 0 direction outputted from Camera Link® Connector
(D9〜D12). (L6 use only） Fixed to 0.
Setting number of output channel
R/W 0 to 1
0: Ch1 only 1: Ch1 and Ch2
PLL lock status of clock signal for output image from
R 0 to 1 Camera Link® Connector (D1〜D4).
0:Locked 、 1:Unlocked
PLL lock status of clock signal for output image from
R 0 to 1 Camera Link® Connector (D5〜D8).
0:Locked 、 1:Unlocked
PLL lock status of clock signal for output image from
R 0 to 1 Camera Link® Connector (D9〜D12). (L6 use only)
0:Locked 、 1:Unlocked
Setting PLL clock signal for output image from Camera
R/W 0 to 1 Link® Connector (D1〜D12) in same time.
0:initial condition 、 1: Reset
R/W 0 to 65535 Setting line rate (for internal sync. mode)
Camera Link® is a trade mark registered by AIA（Automated Imaging Association).
Function
© Mitsubishi Electric Corporation
Initial
L6:12960
0
0
0
0
0
0
0
0
5833
91