Download Print this page

Mitsubishi Electric KD Series User Manual page 32

Contact image sensor, web surface inspection
Hide thumbs

Advertisement

Table of Contents
2-6 Specification
Output Mode-2
・ Refer to p34-36 for Connector assignment of Camera Link® D1-D12
・ Image data is outputted by adjacent format only. (Other image data format is not available.)
・ Refer to next page to check relationship between connector and output channel.
[1ch Output]
•KD6R1064/1247DXL-NL:
Image data is outputted from 4 connectors (D1,D2,D5,D6) if using Medium, Full, Deca Config.
Image data is outputted from 2 connectors(D1,D5) if using Base Config.
D1,D2,D5,D6 connectors belong to "Ch1".
•KD6R1688DXL-NL:
Image data is outputted from 6 connectors (D1,D2,D5,D6,D9,D10) if using Medium, Full, Deca Config.
Image data is outputted from 3 connectors(D1,D5,D9) if using Base Config.
D1,D2,D5,D6,D9,D10 connectors belong to "Ch1".
Hereinafter above output method is called "1ch output". This method is the standard output mode in ordinary operation and ex-factory
condition.
[2ch Output]
•KD6R1064/1247DXL-NL:
Image data is outputted from 8 connectors (D1-D8) if using Medium, Full, Deca Config.
Image data is outputted from 4 connectors(D1,D3,D5,D7) if using Base Config.
The connectors belonged to Ch1 and Ch2 are used in this output mode.
•KD6R1688DXL-NL:
Image data is outputted from 12 connectors (D1-D12) if using Medium, Full, Deca Config.
Image data is outputted from 6 connectors(D1,D3,D5,D7,D9,D11) if using Base Config.
The connectors belonged to Ch1 and Ch2 are used in this output mode.
Hereinafter above output method is called "2ch output".
TM-XJ959A
Camera Link® is a trade mark registered by AIA(Automated Imaging Association).
32
© Mitsubishi Electric Corporation

Advertisement

Table of Contents
loading

  Related Manuals for Mitsubishi Electric KD Series

This manual is also suitable for:

Kd6r1064dxl-nlKd6r1247dxl-nlKd6r1688dxl-nl