Mitsubishi Electric KD Series User Manual page 43

3-1 Installation
3-1-6 Precautions for installing CIS to your equipment
○The weight of this product is approx. 7Kg (for L5) 9Kg (for L6).
・ Main parts of this product consist of Metal, and the center of gravity of CIS is skewed to the Scanning
Surface side.
When you handle and install to equipment, please take care not to drop this product.
・ This product weight(especially, L5, L6 size ) is so heavy, so the caution label is pasted on the product
to alert it.
○There is a connection point of Rod Lends Arrays in L5/L6 products
・ The caution label is pasted on the connection point of Rod Lends Arrays. When you bring and install
to your equipment, please do not hold the connection point of Rod Lends Arrays (the area which the
caution label is pasted on).
・ This product may be broken if the excessive power is pressed on the connection point of Rod Lends
Arrays (the area which the caution label is pasted on).
Scanning Surface
TM-XJ959A
※Caution label to alert offset center of gravity.
※Caution Label which is
pasted on the connection
point Rod Lends Arrays
43
© Mitsubishi Electric Corporation