3-2-1 Preparation by users
③ Camera Link ® cable
CIS (This product) has Mini-Camera Link® connectors 12226-
1150-00PL(produced by 3M).
Check the connectors of Grabber board (Mini-Camera Link®
or Camera Link® ) and prepare the connectable cables.
④ Frame grabber board
Prepare Frame Grabber board (or PC with Grabber board
installed) supporting Camera Link®.
CIS does not support PoCL. Set the Frame Grabber board
settings NOT to supply +12V power over the Camera Link®
Camera Link® is a registered trademark of AIA (Automated Imaging Association).
⑤ DC5V power
Supply more than the current capacity listed in below.
Current capacity (A)
© Mitsubishi Electric Corporation