Initial Settings - Mitsubishi Electric KD Series User Manual

5-1 Initial settings

5-1-1 Initial settings
Items Initial settings
24bit RGB
Camera Link®
Output format
Base Configuration 1ch
600dpi
Output resolution
Interpolation OFF
Synchronization
Internal synchronization mode
signal setting
Dark Correction
OFF
LED Control Turn ON
※LED trigger signal control
Duty period: 12.9us
White Correction OFF
PGA
Not used (1 time)
ON
Resolution in transport
Line adjustment direction: 600dpi
Transport direction: Original
(BGR)
γ correction
OFF
Overwrap output
OFF
Mono mode OFF. Color output
Boot Select: Factory Default
Initial Setting Select Correction Select :
Only 600dpi
Dark and White
Correction Data: Only 600dpi
Correction Data
TM-XJ959A Camera Link® is a registered trademark of AIA (Automated Imaging Association).
[CIS initial settings]
1) Initial settings of this product are described on the left
table, when you power on the product without any uses
after the shipment from our factory.
2) Refer to the following pages about any respective
settings for your applications.
65
© Mitsubishi Electric Corporation