Download Print this page

Ce Marking - Mitsubishi Electric KD Series User Manual

Contact image sensor, web surface inspection
Hide thumbs

Advertisement

1-3 CE marking

1-3-1 CE Mark compatibility conditions
KD6R1064DXL-NL and KD6R1247DXL-NL are designed to comply with EMC Directive 2014/30/EC of EU
legislation.
In order to make this product CE mark compliant, use this product under the following conditions.
① Length of 5V power supply cables has to be 3m or shorter. Attach ferrite cores recommended in
the following pages with the power supply cables in order to reduce noise emission. The details
of the ferrite cores are explained in the following pages.
② Prepare your power supply dedicated for this product, and supply 5V power to this product.
Moreover, this product is designed as an embedded module. When this product shall be installed to the
other equipment, the equipment has to be compliant with the necessary regulation and directives.
This product is complied with the following EMC directives and standards.
EMC directives
Applicable standards
Category of ISM equipment by EN55011: Comply with Group 1, Class A test standard
Class A equipment is regulated to be used under industrial environment. It could be
potentially difficult to assure the electromagnetic compatibility under other
environment. Refer to EN55011 standards for further details.
TM-XJ959A
2014/30/EC
Immunity EN 61000-6-2:2005 / AC:2005
Emission EN 61000-6-4:2007 + A1:2011
12
© Mitsubishi Electric Corporation

Advertisement

loading

  Related Manuals for Mitsubishi Electric KD Series

This manual is also suitable for:

Kd6r1064dxl-nlKd6r1247dxl-nlKd6r1688dxl-nl