Removing The Enginefrom The Frame - GAS GAS Enduro Series Workshop Manual

Workshop manual
RemOVING THe eNGINe fROm THe fRame
Note:
The cylinder head, cylinder, clutch and ignition can be detached without
needing to remove the engine from the frame.
- Thoroughly clean the motorcycle before beginning the removal.
- Place the motorcycle on a suitable support to enable work to be carried out on it.
- Remove the fuel tank together with the two side covers, seat and frame side
guards.
- Remove the kick-start pedal lever (arrow)
- Loosen the springs that hold the exhaust pipe to the cylinder piping.
- Remove the entire exhaust system.
-11-