Clutch Spring; Clutch Press; Bearing And Pusher; Lined Clutch Discs - GAS GAS Enduro Series Workshop Manual

Workshop manual
SeRVICING aND RePaIRING THe eNGINe'S COmPONeNTS

Clutch spring

- Check the condition of the springs and their length.
Length of the springs
Note:
All of the clutch springs should be replaced.

Clutch press

- Check condition and clutch disc contact surface for scratches and excessive
wear.

Bearing and pusher

- Check the clutch bearing and pusher for jamming marks, grooves and gaps.

Lined clutch discs

- Check the thickness of the lined clutch discs.
Lined clutch disc thickness
Iron clutch discs
- Check the clutch disc for scratches and warping or deformation.
Maximum iron clutch disc deformation
-46-
Min. 45.7 mm.
Limit: 44 mm.
STD: 2.72 to 2.85 mm
Limit: 2.68 mm.
0.05 mm