Dismantling The Engine; Preliminary Instructions - GAS GAS Enduro Series Workshop Manual

Workshop manual

Dismantling the engine

1

Preliminary instructions:

Note:
 W hendismantlingtheengine,keeppairsofpartstogether.Thisincludes
gears,cylinders,pistonsandotherpartssubjectedtonaturalwearintheir
pairs.
Pairsofpartsshouldalwaysbereplacedtogether.
 D uringdismantling,cleanallpartsandplacethemintraysinorderof
disassembly.Thiswillspeedupreassemblyandensurethatallpartsare
properlyfitted.
Partsshouldbekeptawayfromanyfiresource.
Allgaskets,sealsandO-ringsmustbereplacedeverytimetheengineis
partiallyorcompletelydismantled.
- Thoroughly clean the engine before placing it on the bedplate.
- Place the engine on the bedplate.
- Remove the spark plug from the cylinder head.
DISMANTLING THE IGNITION
- Remove the screws (arrows) from the ignition cover.
- Block the rotation of the magnetic flywheel.
- Remove the nut (1).
Attention:
 T hemagneticflywheelnutloosenstotheleft!
-19-