Engine Identification - GAS GAS Enduro Series Workshop Manual

Workshop manual
GeNeRal INfORmaTION
*(A) NUT *(B) SCREW
10 mm 6 mm
12 mm 8 mm
14 mm 10 mm
17 mm 12 mm
19 mm 14 mm
22 mm 26 mm
*A: Distance between the planes of the nut.
*B: External diameter of the screw thread.

ENGINE IDENTIFICATION

- The engine serial number is stamped on the bottom of the left-hand semi-
crankcase.
- Always quote the engine serial number when ordering an original GG spare
part for the engine.
-7-
GENERAL TIGHTENING TORQUES
Nm Kgf.m Ft.lb
6 0.6 4.3
15 1.5 11
30 3.0 22
55 5.5 40
85 8.5 61
130 13.0 94