Workshop manual
SeRVICING aND RePaIRING THe eNGINe'S COmPONeNTS
Kick-start shaft
- Check that the teeth of the kick-start shaft show no signs of excessive wear or
contact marks.
- Check the clearance of the shaft in the casing housing.
- Check that the lubrication channels are clean and free of debris.
Ratchet
- Check that the ratchet teeth show no signs of excessive wear.
Kick-start sprocket
- Check that the sprocket shows no signs of excessive wear or gaps.
- Check that the teeth of the kick-start sprocket show no signs of excessive wear
or contact marks.
Inner sprocket
- Check that the sprocket shows no signs of excessive wear or gaps.
- Check that the lubrication channels are clean and free of debris.
- Check that the inner bushing of the sprocket is not scratched or worn.
-54-