11 Drive Error Codes; Generic Module (From 0000H); Automation Control Interface (From 0400H) - HP LTO Ultrium Technical Reference Manual

11 Drive error codes

The following error codes may be reported in bytes 16 and 17 of the Request Sense data and also
reported in ACI Get Error Info RDATA, bytes 3 and 4. See the REQUEST SENSE command in Chapter
4 of the Host Interface Guide, Volume 3 of the HP LTO Ultrium Technical Reference Manual.

Generic module (from 0000h)

Code
0000h
0001h
0002h
0003h
0004h
0005h
0006h
0007h

Automation Control Interface (from 0400h)

Code
0401h
0402h
0403h
0404h
0405h
0406h
0407h
0408h
0409h
Description
Good.
Bad.
Done.
Aborted.
Invalid configuration values.
Invalid configuration name.
Place holder until real status is known.
Invalid parameter supplied to function.
Description
Unsupported command opcode.
Busy—command rejected.
RAMBIST failed.
Invalid command checksums.
Invalid baud rates.
Invalid command while load/unload pending.
Time-out waiting to end immediate command.
RAM framing error.
RAM overrun error.
Volume 1: hardware integration 79