Trace Logger (From 6C00H); Mechanical Interface (From 7400H) - HP LTO Ultrium Technical Reference Manual

Trace logger (from 6C00h)

Error
6C00h
6C01h
6C02h
6C03h
6C04h

Mechanical interface (from 7400h)

Error
7400h
7401h
7402h
7403h
7404h
7405h
7406h
7407h
7408h
7409h
740Ah
740Bh
740Ch
740Dh
740Eh
740Fh
7410h
7411h
116 Drive error codes
Description
TraceLogger initialization failed. BMM returned no good.
The last Live Trace entry has been reached. Not an error.
The drive has insufficient resources to set more Live Traces.
A flush has started and the initiator must wait to receive the SDL signal diTraceLogFlushed.
An operation has started but the caller must wait for the callback function to be executed.
Description
No error.
Aborted command.
Unsupported command.
Wrong number of parameters.
Invalid parameter.
This command is already in progress.
This command is not allowed now.
Command processing error.
A DSP event has occurred (most likely an off-track event unless the default was changed).
The command is obsolete.
Incomplete initialization of the mechanism
There was a timing fault in the servo interrupt.
The mechanism type (SensorRev) specified in the mechanism EEPROM is either obsolete
or unsupported.
Obsolete command 300C.
Obsolete command 300D.
Invalid task. The current task for the servo system is of an unknown type. This is most likely
caused by a firmware bug.
A Load command is not allowed at this time.
An Unload command is not allowed at this time.