Buffer Manager (From 0800H) - HP LTO Ultrium Technical Reference Manual

Code
045Dh
0480h
0481h
0482h
0483h
0484h
0485h
0486h
0487h
0488h

Buffer manager (from 0800h)

Code
0800h
0801h
0802h
0803h
0804h
0805h
0806h
0807h
0808h
0809h
080Ah
Description
A function will send a response when it has finished.
ACI self-test failure — ACI should not be executing a direct Command while performing
the self-test.
ACI self-test failure — ACI should not be executing a slow Command while performing
the self-test.
ACI self-test failure — if ACI is idle, the Control queue should be empty.
ACI self-test failure — if ACI is idle, the Response queue should be empty.
ACI self-test failure — if ACI is idle, the Surrogate SCSI queue should be empty.
ACI self-test failure — if ACI is idle, only the self-test command should be allocated in
the small Data Region.
ACI self-test failure — if ACI is idle, no memory from the Large Data Region should be
allocated.
ACI self-test failure — if ACI is idle, no CRAM memory should be allocated.
ACI self-test failure — if ACI is idle, only one CCB should be allocated.
Description
The buffer manager failed to initialize correctly.
No Buffer Allocation description exists for the supplied Module ID
The request queue has overflowed.
The priority request queue has overflowed.
Dataset index error: BMMDataSetIdxToAddr() has been passed an invalid Idx.
Dataset information table index error: BMMDataSetIdxToDSITAddr() has been passed
an invalid Idx.
ACN index error: BMMDataSetIdxToACNandLPOSAddr() has been passed an invalid
Idx.
Wrap index error: BMMDataSetIdxToWrapAddr() has been passed an invalid dataset
Idx.
The Notification queue has overflowed. See BMMXferComplete().
The notification was not SDL signal for DSIT read. See BMMXferComplete().
The Notification queue has underflowed. See BMMXferComplete().
Volume 1: hardware integration 83