HP LTO Ultrium Technical Reference Manual page 100

Table of Contents

Advertisement

Code
Description
302Eh
The Logical Formatter has encountered a decompression error.
302Fh
The Logical Formatter has encountered EOD.
3030h
The Logical Formatter failed to write a filemark — aborted.
3031h
The Logical Formatter failed to write a filemark — data path not empty.
3032h
The Logical Formatter failed to write a filemark — unsupported operation.
3033h
The Logical Formatter has received a non-user data set.
3034h
The Logical Formatter failed to write a filemark — packer paused.
3035h
The Logical Formatter received an unexpected Access Point interrupt.
3036h
The Logical Formatter was unable to insert an end marker.
3037h
The Logical Formatter was unable to complete the new LTO5 Data Key process.
3040h
Logical Media not able to supply any more datasets.
3301h
Operation of the Logical Formatter's Hardware Abstraction Layer has been aborted.
Invalid parameter passed to a function in the Logical Formatter's Hardware Abstraction
3302h
Layer.
A function in the Logical Formatter's Hardware Abstraction Layer has detected an illegal
3303h
combination of variable values.
A function in the Logical Formatter's Hardware Abstraction Layer has received a request
3304h
while in a mode that does not support that request.
The Logical Formatter's hardware has failed to signal (issue an interrupt for) an event expected
3305h
by the firmware.
During a buffer transfer that ended with a final burst of ten bytes or less, the Logical Formatter's
3306h
hardware failed to signal the transfer completion.
During a buffer transfer of ten bytes or less, the Logical Formatter's hardware failed to signal
3307h
the transfer completion.
During a buffer transfer that ended with a final burst of ten bytes or less within the first 1k
3308h
DRAM page, the Logical Formatter's hardware failed to signal the transfer completion.
3309h
A parity error was detected transferring data between Iona/Lucan and Amundsen.
Wanted to start a timer for a potential missing NextDAEmpty interrupt but the pipeline was
330Ah
not empty.
330Bh
LF's C1LFI block detected a parity error while reading a byte out of its FIFO.
330Ch
Logical Formatter detected a correctable SDRAM corruption during Restore.
330Dh
Logical Formatter detected an uncorrectable SDRAM corruption during Restore.
330Eh
Logical Formatter SDRAM corruption.
3310h
Logical Formatter pipeline stalled.
100
Drive error codes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lto ultrium 5

Table of Contents