Front Panel Interface (From 2800H); Host Interface (From 2C01H) - HP LTO Ultrium Technical Reference Manual

Code
2408h
2409h
240Ah
240Bh
240Ch
240Dh
240Eh
240Fh
2410h
2411h
2412h
2413h
2414h
2415h
2416h
2417h
2418h
2419h

Front panel interface (from 2800h)

Code
2801h

Host interface (from 2C01h)

Code
2C01h
2C02h
2C03h
Description
Aborted an active command.
Aborted a command before it became active.
Tried to abort a command that was not queued.
Invalid state requested of the EII State Manager.
The EII tried to process a firmware upgrade type that is not supported.
The EII state manager could not handle an abort request.
Tried to abort a command that was already being aborted.
Tried to get a command for the wrong module.
Command specified in eiNotifyOp would not have been top of queue.
Attempt to delete a queued EII command.
Multiple attempts to delete an executing EII command.
Attempt to queue a queued EII command.
Attempt to queue an executing EII command.
Attempt to remove a command from empty EII command queue.
Attempt to execute a command still on the EII command queue.
Attempt to execute an EII command when another is executing.
Attempt to stop executing an EII command that was not executing.
The module putting a command on the EII command queue is not the module that allocated
it.
Description
Failure due to use of forced eject.
Description
Unknown opcode.
Reserved field set.
Unknown mode page.
Volume 1: hardware integration 89