Error Codes; Hp Insight Management Csp Wbem Providers For Windows Error Codes - HP storeeasy 3000 Administrator's Manual

Table 5 Known issues (continued)
Issue
The SMI-S provider registration with
HP StoreEasy 3000 Storage might
fail due to the following reasons:
No network connectivity existing
between the array and node.
Array is SMI-S provider listing
on port other than the default
HTTPS port (5989).

Error codes

This section contains the error codes that may occur.

HP Insight Management CSP WBEM Providers for Windows error codes

The HP Insight Management CSP WBEM Providers for Windows error codes are listed in
(page 83).
Table 6 HP Insight Management CSP WBEM Providers for Windows errors
Error Description
code
0x910 The CSP Enclosure Provider is
initializing.
0x91 1 CSP Enclosure Provider
initialization successful.
0x912 Enclosure Provider lost connection
with EM.
Fan, Power supply and IO/PCIe
Modules classes will not work.
0x913 Enclosure Provider is unable to
parse the input data provided by
EM.
Fan, Power supply and IO/PCIe
Module classes will not work.
Blade classes may give only partial
data.
0x914 Enclosure Provider is unable to
build internal lists using data
provided by EM.
0x915 Enclosure provider is not
recongising this blade server.
Many or all the classes may fail.
Resolution
d. create partition msr size=128
e. exit
3. Enter the Get-partition
command to verify the new partitions.
To register SMI-S provider with the HP StoreEasy 3000 Storage, ensure that the
array is reachable from the node. Perform the following steps on all nodes:
1. Open an elevated PowerShell command prompt.
2. Enter the following commands for HTTP and HTTPs SMI-S provider:
a. Register-SmisProvider -ConnectionUri
http://<ipadress>:<port-no>.
NOTE: For HTTPs port SMI-S provider, enter Register-SmisProvider
-ConnectionUri https://<ipadress>:<port-no>.
b. Update-StorageProviderCache -DiscoveryLevel 3 -PassThru.
3. Enter Get-StorageProvider to verify the registration of SMI-S provider.
If the registration is successful, SMI-S provider is displayed as registered on
the system.
Source Event Log Entry
Type
HP CSP WBEM Informational
Providers
HP CSP WBEM Success
Providers
HP CSP WBEM Warning
Providers
HP CSP WBEM Warning
Providers
HP CSP WBEM Warning
Providers
HP CSP WBEM Error
Providers
DiskNumber <disk number from above>
Resolution
Retry query to provider after 3 minutes.
Check EM connections and retry query to
provider after 3 minutes.
Check the provider logs for details. Retry
query to provider after 3 minutes.
Check the provider logs for details.
Check the provider logs for details.
Table 6
Error codes 83