Physical Pipeline Control (From 5000H) - HP LTO Ultrium Technical Reference Manual

Error
4C0Ch
4C0Dh
4C0Eh
4C0Fh
4C10h
4C11h
4C12h
4C13h
4C14h
4C15h
4C16h

Physical pipeline control (from 5000h)

Error
5000h
5001h
5002h
5003h
5004h
5005h
5008h
5009h
501Eh
501Fh
5020h
5080h
5081h
5083h
5084h
Description
The physical formatter Read Chain Controller DS0 is stuck.
The physical formatter Read Chain Controller DS1 is stuck.
Physical formatter WP update.
Format other than LTO1 or LTO2.
SDRAM error has been detected.
The number of CCPs presented has fallen below the warning threshold.
A CCP has been overwritten.
A C2 error has been reported.
General physical formatter information.
Unexpected format complete signal arrived.
Check CCQ Write Rewrite log: param 1 = CCQSetsWritten, param2 = CCQSetRewrites,
param 3 = pfStatus.
Description
EOD not found.
Black tape.
EOD encountered.
Undefined error.
The start LPOS of the dataset is before the LPOS of the previous dataset.
The start LPOS is more than 1 metre after the previous dataset.
Invalid configuration has been requested.
Abort reject continue not used.
Search in progress.
Mechanism command time-out; the control command never responded.
Command not allowed in this variant.
Invalid tape type.
The Error Rate Test has been aborted.
PF reported a write error (excessive RWWs).
PF reported a read error (C2).
Volume 1: hardware integration 111