HP LTO Ultrium Technical Reference Manual page 81

Table of Contents

Advertisement

Code
Description
0428h
ACI Control queue is empty.
0429h
ACI Response queue is empty.
042Ah
ACI Response packet was NAKed.
042Bh
ACI attempted to execute an unsupported PPL command.
042Ch
ACI has detected a command with a parameter out of range.
042Dh
ACI attempted to execute a PPL command before the previous command completed.
042Eh
ACI received more raw data than expected; see the Write Buffer PPL command.
042Fh
Internal status indicating a slow ACI command rather than a fast one.
0430h
Internal status indicating an operation has initiated a DMA transfer.
Internal status indicating that a firmware image has been downloaded so the firmware
0431h
should have been upgraded.
0432h
Internal status indicating that a firmware image download has been aborted.
0433h
Surrogate SCSI command terminated due to a SCSI reset/abort for the LUN.
0434h
ACI has not been allocated the amount of DRAM it requires.
0435h
ACI has not been allocated the amount of CRAM it requires.
0436h
An ACI surrogate SCSI command packet contained an invalid Exchange ID.
0437h
A CDB contained an invalid exchange ID.
0438h
ACI Surrogate SCSI queue is full.
0439h
ACI Surrogate SCSI queue is empty.
043Ah
A request for an invalid entry in Surrogate SCSI queue has been made.
043Bh
ACI has received an acSurrogateNotifyOp with an unknown SCSI CDB type.
043Ch
The SCSI Data Length parameter has changed unexpectedly.
043Dh
Internal status indicating a PPL Command is being executed.
ACI too busy for fast command. Used in tracepoints to identify cause of
043Eh
AC_BUSY_CMD_REJECTED error.
ACI too busy for immediate command. Used in tracepoints to identify cause of
043Fh
AC_BUSY_CMD_REJECTED error.
ACI too busy for slow command. Used in tracepoints to identify cause of
0440h
AC_BUSY_CMD_REJECTED error.
ACI too busy for SCSI command. Used in tracepoints to identify cause of
0441h
AC_BUSY_CMD_REJECTED error.
ACI too busy because of overlapped commands. Used in tracepoints to identify cause
0442h
of AC_BUSY_CMD_REJECTED error.
Volume 1: hardware integration
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lto ultrium 5

Table of Contents