System Architecture (From 6400H); Tight Integ (From 6800H) - HP LTO Ultrium Technical Reference Manual

Error
5861h
5870h
5871h
5880h
5881h
5882h
5890h
5891h
5892h
5893h
58F0h
58F1h
58F2h
58FFh

System architecture (from 6400h)

Error
6401h
6402h

Tight integ (from 6800h)

Error
6801h
6802h
6803h
Description
An invalid control word was found while parsing the Cal table to program a ASIC. Param
1 = control word, Param 2 = an integer value unique to each ASIC.
Could not write to Amundsen's WEQ Control register.
Illegal WEQ setup requested.
The EEPROM calibration table area contains at least one invalid entry.
The Per Drive Cal table in the EEPROM contains one invalid entry.
The Per Drive Cal table in the EEPROM contains a revision number that is less than the revision
number found in the base Cal table.
rwc_estimate_boost.
rwc_adjust_boost.
rwc_boost_datasets.
A request to reset the Afirs on the channel, Parameter1, was made to the RWC.
Setup Servo.
SMUX.
BEN.
Undefined error.
Description
Formatter ASIC revision check failed. The ASIC is not a LTO 1 Formatter ASIC.
The processor idle time is less than 30%.
Description
The Cmicro error handler function has been called (cm_ErrorHandler).
An implicit signal consumption has occurred.
No free SDL timer storage (in SDLTimerFreeList) to set new timer — increase
MAX_SDL_TIMERS in TightInteg/cmTmr.c.
Volume 1: hardware integration 115