HP LTO Ultrium Technical Reference Manual page 138

Error Description
9436h Early Warning EOM encountered.
9437h Invalid field in Write buffer descriptor.
9438h Prediction threshold exceeded false failure.
9439h Prediction threshold exceeded failure.
943Ah Echo buffer invalid.
943Bh LUN not configured.
943Ch Invalid field in PR Out data.
943Dh PR Out parameter list length error in CDB.
943Eh PR Out truncated data.
943Fh Reservations released Unit Attention.
9440h Registrations preempted Unit Attention.
9441h Reservations preempted Unit Attention.
9442h Invalid release persistent reservation.
9443h WORM overwrite attempted.
9444h WORM cannot erase.
9445h Drive cleaning in progress.
9446h Loading media.
9448h Unloading media.
9449h Firmware upgrade in progress.
944Ah Cartridge is write-protected.
944Bh Writing inhibited, caused by bad Cartridge Memory.
944Ch Unknown cartridge loaded but not threaded.
944Dh Tape is loaded but not threaded, initialize command is required.
944Eh MAM is accessible but the cartridge is in load 'hold' position — not ready.
944Fh The tape is threaded but the drive shows it as unloaded.
9450h No media loaded.
9451h An invalid Port ID has been logged in.
9452h The RMC logical unit has been taken offline by the ADC RMC Logical Unit Mode page.
9453h Write inhibit—the media is the wrong generation.
9454h Tape position is past BOM.
138 Drive error codes