Monitor Screen Indicators - PHILIPS Respironics Trilogy 202 User Manual

72

Monitor Screen Indicators

This section describes the following indicators:
•
Monitor Panel Indicators
•
Measured Settings Panel Indicators
•
Status Panel Indicators
Monitor Panel Indicators
All of the indicators that may appear on the Monitor Panel are
described in detail in the following table. The Detailed view is shown
below. The Monitor panels for the Active circuit and the Passive
circuit are different, so both panels are shown. Some of these items
do not appear in the Detailed View Off screen.
Indicator
Prescription
Therapy Mode
Trilogy 202 clinical manual
If you set up a dual prescription for the patient, the words
"Primary" or "Secondary" appear in the top left corner of the panel
to indicate which prescription is active.
The current therapy mode displays at the top of the panel (for
example, CPAP, S, S/T, etc.). If a special feature such as Flex, AVAPS,
or Sigh is active, this feature will appear next to the therapy
mode.
Note: Dashes on the display
screen indicate that the device
was unable to compute the
parameters. For example, when
the device is first connected to a
patient, the tidal volume, minute
ventilation, and leak may be
dashed until the device is able
to accurately calculate these
patient parameters.
Monitor Panel - Detailed
View (Active PAP Circuit)
Monitor Panel - Detailed
View (Passive Circuit)
Description