PHILIPS Respironics Trilogy 202 User Manual page 62

2. Plug the pronged end of the cord into a wall outlet not
connected to a wall switch.
3. Ensure that all connections are secure. If AC power is connected
correctly and the device is operating properly, the green AC
Power LED should be on.
4. Secure the power cord using the cord retainer on the back of
the device, as shown below. To secure the power cord, use a
screwdriver to remove the screw on the cord retainer. Insert the
cord as shown into the cord retainer, and then re-attach the cord
retainer to the device by re-attaching the screw.
CAUTION
The device may only be operated
at temperatures between 5˚ C
and 40˚ C (41˚ F and 104˚ F).
Connecting the AC Power
Cord
WARNING
Periodically inspect the power
cord for damage or signs of
wear. Discontinue use and
replace if damaged.
Note: To remove AC power,
disconnect the power supply
cord from the electrical outlet.
Securing the Power Cord
Using the Cord Retainer
Chapter 4 Ventilator Setup
53