PHILIPS Respironics Trilogy 202 User Manual page 27

18
6. Serial Connector
You can use this connector to connect the device to a computer
running PC Direct or Sleepware software or to other Philips
Respironics' devices such as Alice 5 and AOM. Use the Trilogy
RS232 Serial Cable to connect the ventilator to the external
device or computer.
7. Remote Alarm/Nurse Call Connector
If you are using an optional remote alarm or nurse call system
with the ventilator, you can connect the Philips Respironics
remote alarm adapter cable or nurse call adapter cable to this
connector.
8. Ethernet Connector (when available)
For service only: You can connect a PC or router to this connector
to upload therapy information to a secure web site so you can
review therapy information remotely or remotely troubleshoot
and service the device.
9. External Battery Connector (DC Power Inlet)
You can connect an external, stand-alone lead acid battery here,
using the Trilogy External Battery cable.
10. High Pressure Oxygen Inlet
If using high pressure supplemental oxygen, connect the oxygen
source to the high pressure oxygen inlet.
11. Detachable Battery Pack Slot (shown with battery cover
installed)
If you are using the Philips Respironics Lithium-Ion detachable
battery pack to power the device, remove the cover and attach it
here.
12. Cord Retainer
Secure the power cord using the cord retainer to prevent
someone from accidentally disconnecting the power cord. See
Chapter 4 for more information.
Trilogy 202 user manual
11
12 6 7 9
8
Rear Panel
10