Warnings Symbols Before Use Cleaning Instructions System One Resistance Control Disconnecting and Connecting the Headgear Using the Optional Headgear Clips EasyLife Mask Achieving the Right Fit Comfort Tips Removing the Mask Removing and Attaching the Cushions Specifications Disposal Storage Conditions...
Package Contents Note • EasyLife Nasal Mask Not all packages contain • Headgear listed items. Please • Instructions for Use contact your Home Care Provider or Respironics • QuickStart Fitting Tips for additional items or replacement parts. Figure 1 A = Forehead Pad Slot...
The mask is to be used on patients (>66lbs/30kg) for whom CPAP or bi-level therapy has been prescribed. Important Note: An exhalation port is built into the EasyLife Nasal Mask so a separate exhalation port is not required.
• If oxygen is used with the device, the oxygen flow must be turned off when the device is not operating. Explanation of the Warning: When EasyLife...
Page 6
Warnings (continued) the device is not in operation, and the oxygen flow is left on, oxygen delivered into the ventilator tubing may accumulate within the device enclosure. Oxygen accumulated in the device enclosure will create a risk of fire. • Oxygen supports combustion. Oxygen should not be used while smoking or in the presence of an open flame.
Symbols Symbol Description Consult instructions for use General caution or warning System One Note Does not contain natural rubber latex Does not contain DEHP (bis (2-ethylhexyl) phthalate) EasyLife...
Before Use • Read and understand the instructions completely. • Hand wash the mask. • Wash your face. • Do not apply moisturizer/lotion to your face or hands prior to handling/wearing the mask. Cleaning Instructions Hand wash the mask before first use and daily. The headgear should be hand washed weekly, or as needed.
Philips Respironics System One Resistance Control This mask uses the System One Resistance Control setting This symbol may appear on your Philips Respironics therapy device. This symbol represents the level of mask resistance compensation. Match the setting to the mask as appropriate.
Disconnecting and Connecting the Headgear Thread the headgear strap through the slot in the faceplate (Figure 2). The sticky side will be on the outside while you thread the strap. Fold the strap back and attach the tab to the headgear strap. Using the Optional Headgear Clips (Figure 3) Figure 2 1.
EasyLife Mask The EasyLife Mask is designed with a unique dual-cushion construction. • The inner cushion creates a self-adjusting seal. • The outer cushion provides comfortable support. The outer cushion is not designed to provide seal. Achieving the Right Fit...
Page 12
attach near the back of the head. If using the headgear, the tabs will attach under the ears. Do not pull the straps tight. Adjust the top strap (Figure 6) so the upper straps rest above the ears. The headgear should lay flat against the base of the head.
• If the side headgear straps are lying on your ears, adjust the top headgear strap to lift the headgear off of your ears. The headgear should lay flat against your head. If it is bunching, adjust the top headgear strap to allow the headgear to flatten. EasyLife...
Removing the Mask 1. Disconnect the lower straps by removing one or both headgear clips or detaching one or both headgear straps from the faceplate. 2. Slide the headgear off over your head. The entire headgear stretches for easy removal. Removing and Attaching the Cushions To Remove Pull outward on the three attachment tabs on...
Page 15
(Figure 8). Figure 7 Gently tug on the cushions to make sure they are securely in place. Gently press the forehead pad into the forehead pad slot in the mask frame. Figure 8 EasyLife...
Specifications Warning: The technical specifications of the mask are provided for your healthcare professional to determine if it is compatible with your CPAP or bi-level therapy device. If used outside these specifications, or if used with incompatible devices, the mask may be uncomfortable, the seal of the mask may not be effective, optimum therapy may not be achieved, and leak, or variation in the rate of leak, may affect device...
Deadspace Volume 50 mL 58 mL 65 mL 81 mL 83 mL Pressure Drop cmH 50 SLPM 100 SLPM All mask sizes Disposal Dispose of in accordance with local regulations. Storage Conditions Temperature: -4º to +140º F (-20º to +60º C) Relative Humidity: 15% to 95%, non-condensing INSTRUCTIONS FOR USE...
This warranty does not apply to any Product that may have been repaired or altered by anyone other than Respironics. EasyLife...
Page 20
Respironics disclaims all liability for economic loss, loss of profits, overhead, or indirect, consequential, special or incidental damages which may be claimed to arise from any sale or use of the Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Need help?
Do you have a question about the EasyLife and is the answer not in the manual?
Questions and answers