Table of Contents
Advertisement
430
7-3. Do-it-yourself maintenance
tecting the wiring harness from
damage.
WARNING
■
To prevent system break-
downs and vehicle fire
Observe the following precau-
tions.
Failure to do so may cause dam-
age to the vehicle, and possibly a
fire or injury.
●
Never use a fuse of a higher
amperage rating than that indi-
cated, or use any other object in
place of a fuse.
●
Always use a genuine Toyota
fuse or equivalent.
Never replace a fuse with a
wire, even as a temporary fix.
●
Do not modify the fuses or fuse
boxes.
NOTICE
■
Before replacing fuses
Have the cause of electrical over-
load determined and repaired by
your Toyota dealer as soon as
possible.
MIRAI Owners Manual_USA_M62034_en
Headlight aim
Vertical movement adjust-
ing bolts
Adjustment bolt A
A
Adjustment bolt B
B
Before checking the head-
light aim
Make sure the vehicle has a
full tank of fuel and the area
around the headlight is not
deformed.
Park the vehicle on level
ground.
Make sure the tire inflation
pressure is at the specified
level.
Have someone sit in the
driver's seat.
Bounce the vehicle several
times.
Advertisement
Table of Contents
