Closing Down The Hardware - Brainlab EXACTRAC INFRARED MONITORING Clinical User Manual

7.2.2

Closing Down the Hardware

Hardware
Functions
System Shutdown
Additional Notes on The mains input fuse switch can remain in the I position (ON) and does not need to be reset every
Shutdown day.
Clinical User Guide Rev. 1.1, ExacTrac Infrared Monitoring Ver. 1.0
a
d
No. Component
a
Computer on/off button
s
System off button
d
Mains input fuse switch
f
Emergency stop switch
Steps
1. Shut down the Windows operating system in the usual fashion by clicking Shut Down in
the Start menu.
2. In the system control panel, ensure that the
The ExacTrac workstation is now shut down.
3. In the system control panel, press the
minated, indicating that power is no longer supplied to the ExacTrac system compo-
nents.
For optimum system performance, Brainlab recommends shutting down the ExacTrac
workstation overnight. If the system runs continuously, rebooting the workstation ev-
ery morning is recommended. Not rebooting the workstation regularly may result in
reduced system performance.
s
f
Figure 33
COMPUTER ON / OFF
button. This button is no longer illu-
SYSTEM OFF
button is deactivated.
77