6.4
Infrared Monitoring
6.4.1
Creating a New Patient File
How to Start
Before starting IR Monitoring, the patient (wearing infrared body markers) must be positioned at iso-
Infrared Monitoring
center on the treatment table.
Patient Position
The position of the infrared body markers are displayed in the patient position screens:
Screen
62
Steps
1.
Press Start IR Monitoring in the startup screen (see Page 49).
2.
In order to perform infrared-based patient monitoring, you will need to create a new pa-
tient file.
3.
Enter a patient name and ID in the fields provided, and a comment if required.
If you do not wish to enter a patient's name, click OK. However, it is not possible to
change a patient's name later in the process.
4.
Click OK to generate a new patient file.
Prior to starting this function, you must adjust the couch to the 0° position, and infra-
red body markers must be attached to the patient.
Figure 27
Clinical User Guide Rev. 1.1, ExacTrac Infrared Monitoring Ver. 1.0