Safety Inspection Requirements - Brainlab EXACTRAC INFRARED MONITORING Clinical User Manual

8.2.4

Safety Inspection Requirements

Interval The safety inspection should be performed once a year.
Scope The safety inspection must include all the items described under "Performing Electrical Inspections"
on page 84.
Inspections by The safety inspection must be performed by a qualified engineer who:
Non-Brainlab
• Is qualified for carrying out safety inspections on electrical medical equipment.
Personnel
• Is familiar with the product safety information and product instructions, and has read and under-
• Is up-to-date with current local regulations regarding industrial and non-industrial accident pre-
• Informs Brainlab immediately in writing if the equipment is deemed unsafe.
Inspections by • If a suitably qualified person is not available at the customer site, Brainlab's support specialist
Brainlab Personnel
• If you require a Brainlab support specialist, contact Brainlab support.
Safety Inspection • Make a copy of the instructions provided on the following pages.
Record
• Make a note of the inspection results.
• Keep this as a record of the inspection.
Clinical User Guide Rev. 1.1, ExacTrac Infrared Monitoring Ver. 1.0
stood the user guides.
vention.
will carry out this inspection for a set fee.
83